I have a question about cc2541 ble module.
Someone try to connect this module by i2c to espruino board. There are any problems with i2c slave on cc2541.
Thanks for the fast reply.
I haven't heard of anyone doing it directly, but I think it depends on the firmware in the cc2541.
To get BLE on the Espruino Board you can use an HM-10 module: https://www.espruino.com/Bluetooth+BLE
It's not very well documented, but it does work.
The HM-10 actually uses the cc2541, so if you could run the HM-10 firmware on your cc2541 then you could communicate with it via serial in the same way.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© Espruino, powered by microcosm.
Report a problem