What goes here?

Posted on
  • Hi,

    Recently we've had a whole lot of 'issues' posted on the Espruino forums that relate to the Espruino software running on the ESP8266. (This isn't the same as connecting a ESP8266 module to an Espruino board).

    The port of Espruino is still under heavy development, and there are quite a few gotchas. Please look and post here for any issues related to it - you're much more likely to find an answer, and less likely to confuse any users who have bought an official Espruino board :)

  • Hello, so i have a problem with an esp8266 and the espruino-software. I flashed the brand new MC with espruino_2v05_esp8266 out of the 4mb directory and it seems to went successfull. But there are unreadable string in the console:

    
    >require("ESP8266").reboot();
    =undef&Ë5¡þ
     ets Jan  8 2013,rst cause:2, boot mode:(3,7)
    load 0x40100000, len 2408, room 16
    tail 8
    chksum 0xe5
    load 0x3ffe8000, len 776, room 0
    tail 8
    chksum 0x84
    load 0x3ffe8310, len 632, room 0
    tail 8
    chksum 0xd8
    csum 0xd8
    2nd boot version : 1.6
      SPI Speed      : 80MHz
      SPI Mode       : QIO
      SPI Flash Size & Map: 32Mbit(512KB+512KB)
    jump to run user1 @ 1000
    nÇròn|ìllll`bbrlânbnl`rlÄlþ
    

    and if I try to connect to WiFi:

    var wifi = require("Wifi");
    wifi.connect("my-ssid", {password: "stringofalphabeticsigns"},
       function(err){
      if(err)console.log(err);
      else console.log("connected!");
    });
    

    there just happens nothing.

    My Baud-rate is at 115200, i've no clue, please help.

  • The Problem is not the MC, because it connected to the mobil-hotspot of my phone. Problem with cryptic signs still there. Are there any Problems with wpa2?

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

What goes here?

Posted by Avatar for Gordon @Gordon

Actions