stm32 vct6

Posted on
  • Hi everyone , I have bought this card wich is cheap for me (http://i.ebayimg.com/00/s/MTMwOVgxNjAw/z­/4FcAAOSwQJhUh6-v/$_57.JPG) and I would know if it will work with Espruino ? I have read that http://www.espruino.com/Other+Boards but I 'm not sure. And what kind of project can we do with Espruino ? I have seen a project with the expensive Tessel board wich is a web alarm , you can ping your web site and you receive an alert when it's down , could we eventually do that ?

  • Seems to run the same chip as this http://www.espruino.com/ReferenceHYSTM32­_32?
    EDIT: maybe it's the exact same board, without LCD?

  • I think it is and if it's the same chip iI hope it will be to implement.

  • I'm pretty sure it's not the same board. The HYSTM32 firmware may run on it, but it depends how your board is wired up. Sometimes they use different pins for the 'USB Disconnect' pin which means that USB won't work.

    If it doesn't, you'll have to compile your own firmware. Some info here. If you compile your own then you could make sure you compile networking support and you could then add some WiFi or Ethernet module to the board and access the net.

    However don't expect compiling your own Espruino firmware to be easy! If you want to get started quickly and easily, buy a proper Espruino board - it's more expensive because we've spent time sorting out all the problems for you! :)

  • Ok thanks. Maybe will i buy an official card , it will be better .

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

stm32 vct6

Posted by Avatar for polaroid62 @polaroid62

Actions