-
• #2
What's the error you get?
-
• #3
I get no error. I press connect => send to espruino and than nothing happen.
Strange.
T.
-
• #4
It seems to work for me on 1v54. Are you using the Espruino board, or one of the other boards?
Some boards (like the F4 discovery) don't have flow control on USB and so can lose characters as they are sent.
Hi There,
I experience strange error in following example - https://gist.github.com/korczis/9295189
When I remote Block1 OR Block2 it works. When both blocks are present it does not.
Any ideas how to troubleshoot this?
Thanks in advance,
T.