IDE "Send to Espruino" stops working--size limit exceeded?

Posted on
Page
of 2
Prev
/ 2
  • @Robin,

    The values in my screenshot for post #22 came from the Web IDE connected to my Bangle.js v1. I actually never even noticed the blocksize before and haven't done anything I'm aware of to change the default value. 13 definitely seems like an odd number, though.

  • Hope you are not superstitious!     ;-)

  • 'definitely seems like'

    and, . . . 13 is actually an odd number. . . . ha ha, wink, wink    ;-P



    The English Language at times can be quite persnickety

  • FWIW I have been successful at over a 30K ~1000+ line file (which would minimize to 9K with comments removed) upload to a Pico. While doing this I kept an eye on available memory.

    This is completely off topic, but on an ESP32 with 4MB of flash space I routinely upload a 180K program file from the Web IDE that gets minified down to 90K or so, and everything works fine.

    I post this just as a reference. The Web IDE certainly works in that case...

  • 'The English Language at times can be quite persnickety'

    And you identified a prime example I completely overlooked, thanks for pointing that out :-)

  • I post this just as a reference. The Web IDE certainly works in that case...

    Thanks for chiming in with another reassuring reference point about large apps. It seems there's something odd about my Chrome/Ubuntu setup, which is very strange because I installed Chrome only to use the Web IDE. Regardless, Gordon's catch of the exception seems to have fixed the problem for me in the beta IDE.

  • Sun 2021.10.17

    post #30    'And you identified a prime example'

    Ooops! yet another   (unless that is intentional - and I just caught it)

    Italics 'prime' example describing text '13' example, that is in fact an odd Prime Number.

  • Sun 2021.10.17

    reply to #29 post

    Thank you for posting that analysis @MisterG

    In order to reduce confusion within the Espruino community and for our new members, I believe the Pico micro referenced is different from an Espruino Pico I mentioned in my post.

    from separate @MisterG thread 'The PICO I'm using (M5StickC) is just an ESP32'
    https://shop.m5stack.com/products/stick-­c?variant=17203451265114

    The ESP32-Pico is likely an Espressif chip

    https://www.espressif.com/sites/default/­files/documentation/esp32-pico-d4_datash­eet_en.pdf
    with 4M of integrated flash - eigth times the capacity

    while the Pico I'm referring to is an authentic Espruino Pico using the STM32 by STMicroelectronics.

    https://www.espruino.com/Pico

    https://www.espruino.com/datasheets/STM3­2F401xD.pdf
    512KB Flash

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

IDE "Send to Espruino" stops working--size limit exceeded?

Posted by Avatar for TTBangler @TTBangler

Actions