BangleJS Load Problem

You are reading a single comment by @LethalLeafs and its replies. Click here to read the full conversation.

•

Robin

Sat 2021.08.28

'still able to connect to the Web IDE through BLE despite the watch not displaying anything'

Great, so we confirm a 3 button Bangle 1 original and BLE is working.

'I have tried every recommendation'

Please try the steps below: 'Resetting without loading any code'

http://www.espruino.com/Bangle.js#resetting-without-loading-any-code

Be sure to:
1) 'Long-press BTN1 + BTN2 for about 6 seconds'
2) Continue holding both for an additional 6 seconds

Q1: Do you see the 'Watchdog' 'Booting' instruction on the display?
Q2: Does the watch vibrate?

•

LethalLeafs in reply to @Robin

That would be a yes to both of those questions. Still works a day or two later. Everything in the bootup and resetting process works perfectly fine up to the logo. To clarify, I am not only able to go to the logo screen, and cannot progress any further than that. I found this article with the same problem:
http://forum.espruino.com/conversations/345403/
But I figure that it might not be right for me since they got here from a different problem

About

Avatar for LethalLeafs @LethalLeafs started