[NOT SOLVED] Not able to update the Espruino Pico firmware using ST's DFU utility

Update: This issue is no longer relevant. 🙂

Hi 🙂!

I'm trying to update the Espruino Pico by following the "Advanced Reflashing" guide using ST's DFU utilities.

Attempting to flash
To later verify the flash, I'm using the v. 2.05 binary, since it runs v. 2.06 right now.

I then did:

1. Put the device into DFU mode by holding the button, connecting USB, releasing the button. I shorted the jumper on the bottom before hand as instructed.
   
2. Selected the device in the "DfuSe Demo" utility from ST. Then selecting the .dfu-file (the .bin converted by using the "Dfu file manager" utility from ST)
   
   

The result looks OK I guess 🤷♂️:

Verifying the flash
I take my Pico out of DFU-mode, and connect to it using the "Espruino WEB IDE", but it still shows up as FW v 2.06 😥.

I also tried
... the command line tool using the command "DfuSeCommand -c -d --v --fn espruino_2v05_pico_1r3.dfu" which also claims to succeed.

I hope someone is able to help me out 😊!

2 Attachments