• Added this to my code:

    A13.read();

    And the blue led is now off.

    The power consumption in sleep unfortunately still seems to be around 2.3 mA

  • Wed 2020.02.27

    'And the blue led is now off'

    YIPEE !!

    'still seems to be around 2.3 mA'

    Didn't expect it to be close to the same, but a bit more of a lesser value.

    Can we confirm that we don't have an off by 1000 setting on the current measuring device? I've burned myself thinking uA but reading mA and vice-versa

    Time for a 1% resistor and battery only circuit to prove out the meter will actually read that on the low end? e.g. the meter can actually read below 2uA

About

Avatar for Robin @Robin started