I have one ESP-01 and one ESP-01S Chip. (Wikipedia say, it has 1MB ?!)
The Command you post is for 4MB, isn't it?
If I use your command, I got this response:
esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash \
> --flash_freq 40m --flash_mode qio --flash_size 4m \
> 0x0000 "boot_v1.6.bin" 0x1000 espruino_esp8266_user1.bin \
> 0x7C000 esp_init_data_default.bin 0x7E000 blank.bin
WARNING: Flash size arguments in megabits like '4m' are deprecated.
Please use the equivalent size '512KB'.
Megabit arguments may be removed in a future release.
esptool.py v2.8
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: dc:4f:22:5a:85:86
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Compressed 3856 bytes to 2762...
Wrote 3856 bytes (2762 compressed) at 0x00000000 in 0.2 seconds (effective 124.4 kbit/s)...
Hash of data verified.
Compressed 459684 bytes to 320164...
Wrote 459684 bytes (320164 compressed) at 0x00001000 in 28.2 seconds (effective 130.4 kbit/s)...
Hash of data verified.
Compressed 128 bytes to 75...
Wrote 128 bytes (75 compressed) at 0x0007c000 in 0.0 seconds (effective 80.9 kbit/s)...
Hash of data verified.
Compressed 4096 bytes to 26...
Wrote 4096 bytes (26 compressed) at 0x0007e000 in 0.0 seconds (effective 4105.0 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
But now I got a connection. Thanks a lot. I'm so happy now to get the first connection :)
Do you have a tiny test-script for me to upload something?
Is there a documentation to see which commands are supported for the different Chip-types like esp-01, esp-01s, esp32-cam, node-mcu and so on?
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
I have one ESP-01 and one ESP-01S Chip. (Wikipedia say, it has 1MB ?!)
The Command you post is for 4MB, isn't it?
If I use your command, I got this response:
But now I got a connection. Thanks a lot. I'm so happy now to get the first connection :)
Do you have a tiny test-script for me to upload something?
Is there a documentation to see which commands are supported for the different Chip-types like esp-01, esp-01s, esp32-cam, node-mcu and so on?