You are reading a single comment by @Raik and its replies. Click here to read the full conversation.
  • Ok, so I did a little more testing and sending the data as Uint8Array only writes the first byte of the array to the papers RAM, see pictures (first (red one) is actual, second is supposed to be).

    Strange. Could still be an issue with the papers ability to handle all the data transferred to quickly maybe? I lowered the baud rate to 100. It slows everything else down of course, but sill no success.

    Just read the specs for the controller. Seems like it supports clock rates up to 20MHz.

    3-wire/4-wire (SPI) serial interface for system configuration: Clock rate up to 20MHz


    2 Attachments

    • first_8_bits_only.JPG
    • full_data.JPG
About

Avatar for Raik @Raik started