I recieved a different board ... but its also an ESP8266EX where i get the same issue:
Flashes OK with different flashers and arguments, but allways spits jibberish before the espruino ASCII art and the green putty input cursor only works sometimes before the first reset.
after any power out (also button reset) the console is unresponsive.
Could it be the EX version or maybe something with the serial interface CP2102?
Anyone got a working EX version?
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
here the boot output from baud 76800
ets Jan 8 2013,rst cause:2, boot mode:(3,7)
load 0x40100000, len 2408, room 16
tail 8
chksum 0xe5
load 0x3ffe8000, len 776, room 0
tail 8
chksum 0x84
load 0x3ffe8310, len 632, room 0
tail 8
chksum 0xd8
csum 0xd8
2nd boot version : 1.6
SPI Speed : 80MHz
SPI Mode : DIO
SPI Flash Size & Map: 32Mbit(512KB+512KB)
jump to run user1 @ 1000
rf cal sector: 1019
freq trace enable 0
rf[112]Хz+UE]W▒(▒▒▒▒▒▒▒▒B▒▒.....
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
I recieved a different board ... but its also an ESP8266EX where i get the same issue:
Flashes OK with different flashers and arguments, but allways spits jibberish before the espruino ASCII art and the green putty input cursor only works sometimes before the first reset.
after any power out (also button reset) the console is unresponsive.
Could it be the EX version or maybe something with the serial interface CP2102?
Anyone got a working EX version?
here the boot output from baud 76800