My pico ist unable to activate the bootloader to upgrade the firmware 1.93 to 1.99

Thr 2018.10.04

'How can I insert a image in the post'

Deploy your image to a hosting service that allows public access. Click the 'image' button in the row of buttons just below 'Post a reply' in the forum Reply window. Enter the absolute URL that points to that image. To make sure you have the right URL, enter the http://......myImage.jpg address where the image is located in a browser first and make sure the image is visible.

' If I write a link to the image a picture is not to be seen'

Is the link an absolute URL and not a relative one? Is it possible that a local hard drive file:/// specifier was used in error? Link must start with 'http'

'so that I can show you the messages'

If the messages you are referring to are in the left hand pane of the IDE, you are able to mouse rollover and highlight that section, Ctrl+A Ctrl+C to copy to the clipboard, then place the insertion caret here in the forum Reply area and paste, Ctrl+V Then, highlight that text here and press the 'code' button in the row of buttons above the posting area.