I'm running the 1v99 release on an AI-Thinker ESP-12Q module (4MB flash), trying to connect to a Linksys EA7500 running firmware 2.0.6.190009.
My problem is the Wifi.connect fails with 'bad password' 90% of the time. When I do connect, I don't remember the magic combination of resets, reconnects, and reloads I had to do to make it work (and it may not matter anyway). On a 1-year old thread someone posted that continual retries worked for them, I found that it would fail 9 times then hang on connect()
Example program attached.
Thanks in advance!
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
I'm running the 1v99 release on an AI-Thinker ESP-12Q module (4MB flash), trying to connect to a Linksys EA7500 running firmware 2.0.6.190009.
My problem is the Wifi.connect fails with 'bad password' 90% of the time. When I do connect, I don't remember the magic combination of resets, reconnects, and reloads I had to do to make it work (and it may not matter anyway). On a 1-year old thread someone posted that continual retries worked for them, I found that it would fail 9 times then hang on connect()
Example program attached.
Thanks in advance!
1 Attachment