Using the MDBT42 bare module in a custom board, and I had a question about the proper wiring of the reset button (BTN1) in order to get the module to enter boot loader mode.
We are using a button with four pins since it is a stock part at our PCB fabricator and makes for a significantly cheaper build.
With the current schematic I am able to press the button and have the module reset as expected, but I am unable to get it to go into boot loader mode when applying power with the button pressed down for a split second.
I feel like I may be missing something really obvious here, any ideas?
© Espruino, powered by microcosm.
Report a problem