You are reading a single comment by @user80719 and its replies. Click here to read the full conversation.
  • thanks for the reply,

    1) connected correctly
    2) its a 9v psu and works fine for other applications
    3) usb cable is out
    4) solid 9v
    5) saved correctly, no errors
    6)LED1 flashes then my LED2 flash test program runs
    7) breadboard, just the pico and the power connector attached

    • and - pads for the battery connector test fine with continuity connector to the BAT_IN and GND pins.
About

Avatar for user80719 @user80719 started