Is it possible to connect a Tessel Accelerometer module to an Espruino (WiFi)?

Hello, I ordered a Tessel2 + Accelerometer, and I'd also like to order an Espruino. I am wondering if I can hook the Tessel Accelerometer to an Espruino, or if I should buy another accelerometer?

I'm sort of new to all this, I only have prior experience with an Arduino but not connecting things to it.

I suppose it is simply a matter of sending the correct electrical signals into the Tessel Accelerometer, but I'm not sure how easy/hard that will be.

I suppose it doesn't matter much since I bought both the Tessel+Accelerometer and Espruino+MPU6050 module, so I can experiment. :D

My guess is that to make Tessel's work on Espruino I would have to write an Espruino module for it.

Thanks!

Yes, it looks like the Tessel accelerometer board has a mma84 on it? There shouldn't be anything to stop you using it with Espruino at all, but yes - you'd have to write some code to interface with it. It doesn't have to be a module, but it'd be great if you could share it :)

Tessel's code for it is here: https://github.com/tessel/accel-mma84/bl­ob/master/index.js

There's a lot of boilerplate there, but at the end of the day it looks pretty straightforward (write to some registers to initialise, read XYZ as 3 x 16 bit values).

Rather than decoding Tessel's code, it might be easier to look at Adafruit's driver: https://github.com/adafruit/Adafruit_MMA­8451_Library/blob/master/Adafruit_MMA845­1.cpp#L104

You basically just care about those magic numbers for initialisation, but all the rest of it is basically the same as existing I2C accelerometers - you could just use http://www.espruino.com/LSM303DLHC as a base

Thanks! Looks like the MPU6050 is going to be easier to work with to just get up and running with the existing module. You're right, making a module for the Tessel accelerometer based on Adafruit's code does seem fairly easy, but I'm definitely going to skip on that if the MPU6050 simply works.