You are reading a single comment by @BootySnorkeler and its replies.
Click here to read the full conversation.
Espruino is a JavaScript interpreter for low-power Microcontrollers. This site is both a support community for Espruino and a place to share what you are working on.
@BootySnorkeler
Is there anything I can do?
I tried re-flashing the firmware, but the bootloader mode won't initiate.
I tried every other thing the website told me to do; I looked through the troubleshooting page, tried bootloader mode like 20 times, and of course tried re-connecting it to my mac 2000000 times.
Also, the board was working for the first few days, until I soldered on the bluetooth module. With the bluetooth module the board worked perfectly fine and it got bricked a few hours later after the soldering.
I really really really want my espruino board back! Someome PLEASE help me!
Thanks!
P.S. Also, I have a little solder bridge on my bt module, but with it the bt worked perfectly fine, and so did the board. the bricking happened a few hours later after the mistake. I don;t have a solder wick or pump at hand. I ordered one of each and I'm going to fix it when it gets here.
1 Attachment