Esp8266 tutorial

Any idea why the ESP8266 12 keeps restarting after flashing when I check via picocom/screen? It keeps showing this over and over:

ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 1396, room 16 
tail 4
chksum 0x89
load 0x3ffe8000, len 776, room 4 
tail 4
chksum 0xe8
load 0x3ffe8308, len 540, room 4 
tail 8
chksum 0xc0
csum 0xc0

2nd boot version : 1.4(b1)
  SPI Speed      : 80MHz
  SPI Mode       : QIO
  SPI Flash Size & Map: 32Mbit(512KB+512KB)
jump to run user1 @ 1000

rS
 _____                 _ 
|   __|___ ___ ___ _ _|_|___ ___ 
|   __|_ -| . |  _| | | |   | . |
|_____|___|  _|_| |___|_|_|_|___|
          |_| http://espruino.com
 1v84.tve_master_588d193 Copyright 2015 G.Williams
WARNING: the esp8266 port is in beta!
Flash map 4MB:512/512, manuf 0xe0 chip 0x4016

Could that be the power supply?